• Thermo diffusion runs at significantly lower temperatures than hot dip galvanizing (650-825F) vs. (840-880F)
• Maximum process temperature can be precisely adjusted for each batch, based on coating characteristics for the part to be coated.
• A special zinc powder formulation is available which will allow parts to be ArmorGalv coated as low as 570F.
• Coating thickness can be adjusted from 0.5 to 6 mils (12 -150 microns) (with a +/- 10% tolerance)
• The process evenly coats the inside of hollow &tubular parts.
• Parts do not need to be fixtured, and parts with similar coating characteristics can be mixed where small batches are needed.
• Current equipment can handle parts up to 7 ft. long.
• It is a superior replacement for hot dip galvanizing and zinc plating.
What Sets ArmorGalv Apart
