Request A Quote

Interested in what ArmorGalv® can do for you? Contact us

General Information

Armorgalv® coatings licensed by
Distek NA, LLC and provided by:

Agritek Industries Inc.
4211 Hallacy Drive
Holland, Michigan 49424

Phone: 616.786.9200
Fax : 616.786.9390
Employee Directory

Hours
Office: 7am-5pm M-F
Receiving: 6:30am-4:30pm M-F

  • Wide range of parts ArmorGalv protects a wide range of parts in a variety of industries.
  • Stabiloc Manhole Covers ArmorGalv can be used on complex assemblies with tight tolerences
  • Stabiloc Anchor Kit Or on large parts with unique shapes and functions
  • Cat Thrust Tubes ArmorGalv provides an even coating to all parts, inside and out

Why ArmorGalv®

What sets the ArmorGalv process apart from other coating applications?

  • The thermo diffusion process runs at significantly lower temperatures than hot dip galvanizing
    (650-825F) versus (840-880F)
  • Maximum process temperature can be precisely adjusted for each batch, based on coating characteristics for the part to be coated.
  • A special zinc powder formulation is available which will allow parts to be ArmorGalv coated as low as 570F.
  • Coating thickness can be adjusted from 0.5 to 6 mils (12 -150 microns)
    (with a +/- 10% tolerance)
  • The process evenly coats the inside of hollow and tubular parts.
  • Parts do not need to be fixtured, and parts with similar coating characteristics can be mixed where small batches are needed.
  • Current equipment can handle parts up to 7 ft. long.
  • It is a superior replacement for hot dip galvanizing and zinc plating.

ArmorGalv® grain structure provides a much better bonding surface than electroplated zinc (or Hot Dip Galvanized). The ArmorGalv® surface results in superior adhesion of any top coat. The smooth surface of electro-plating requires various preparations such a chromating and primers to provide basic adhesion of paint, or over-molding.

For extremely rigorous conditions, many top coat options may be used to take advantage of the Armorgalv base and strong bonding surface. This is an ideal combination to reduce corrosion creep when the topcoat barrier is breached in continuous severe conditions.

An image of a table that compares ArmorGalv to other popular coating types.